Rishi Sports

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:-Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

The Under Frame:-Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:-After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of
dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with
air pass groove and treated with special anti termite and water resistant lacquer.
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the
two wings at 350 mm x 350 mm
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a
thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of
dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with
air pass groove and treated with special anti termite and water resistant lacquer.
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the
two wings at 300 mm x 300 mm
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a
thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:-Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

The Under Frame:-Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:-After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Production Capacity: 10000
• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Production Capacity: 15000
• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Production Capacity: 5820
• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:-Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

The Under Frame:-Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:-After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of
dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with
air pass groove and treated with special anti termite and water resistant lacquer.
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the
two wings at 350 mm x 350 mm
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a
thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of

dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in

tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with

air pass groove and treated with special anti termite and water resistant lacquer.

 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite

solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the

two wings at 350 mm x 350 mm

 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before

laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect

level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and

will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by

inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of

8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls

Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a

thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of
dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with
air pass groove and treated with special anti termite and water resistant lacquer.
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the
two wings at 350 mm x 350 mm
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a
thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment

Surface Board:- Made of Kiln Seasoned (moisture containt of approximately 14% at the time tiome of
dispatch), Treated  Wood finished with 21 mm thick, 57 to 83 mm wide and in random length in
tongue and groove shape. The edges of the boards will have a finger lock groove and the bottom side with
air pass groove and treated with special anti termite and water resistant lacquer.
 The Under Frame:- Made of commercial quality pine wood runners of 70 mm x 45 mm, treated with antitermite
solution and fixed on the bottom side with 10 mm thick air cushioned pads, stappled through the
two wings at 350 mm x 350 mm
 Installation:- IPS subfloor treated with a vapour barier to be placed on the leveled IPS sub-floor before
laying the under frame. The runners having air cushion pads to be placed on the vapour barier in perfect
level at 350 mm in 1 direction. The surface board to be screwed to the runner through the tongue only and
will lock the screwed tongue by the groove of adjoining board. Ends of the boards will be locked by
inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of
8 to 10 mm to be left open between the wooden flooring and the surrounding tiled area / walls
Finishing:- After laying the flooring, the floor boards will be levelled to a uniform surface and applied a
thin coat of water based police on the the face

Additional Information:

• Delivery Time: Within 2 Days After the Receipt Of Payment